K2 Resigrout conforms to BS 4551, BS 5080, BS 2782 standards.
Gel Time(Temp) Gel Time(min) Minimum Time Required Before Loading(hours)
20 80 7
30 40 3
40 15 1
K2 Resigrout polyester resin grout resin is flammable. Closed areas must be well ventilated and no naked flames allowed.
The product should be stored away from high temperature.
Six months shelf life when stored below 25 degrees in original unopened containers.
Resigrout Used for high strength resistant anchoring of bolts & bars from 12-25 mm diameter into concrete, rock masonry or brickwork where high speed of installation and early application of load required. Resigrout polyester resin grout is a premeasured, two parts, filled polyester resin grouts, after hardening the grout produces anchorages of consistent reproducible values.
Gains rapid strength. Resistant to vibrations and corrosion.
Ideal for underwater placement.
Resigrout conforms to BS 4551, BS 5080, BS 2782 standards.
Gel Time(Temp) Gel Time(min)
Chemical Resistance :
The cured resin is resistant to fresh and salt water, petrol, oils, grease and most acids, alkalis and solvents.
Parameters of anchor design :
The high strength of cured resin permits strong anchors to be created. ultimate strength is determined by :
Strength of host material.
length of resin bar to bar.
Hole preparation and formation.
Type and dimension of bar.
Bar Preparation :
All bars should preferably free from grease and flaky rust.
Fire resistance and Creep :
At opening temperatures above 40 degrees, The creep of resigrout polyester resin grout resin under load may become significant. Resin anchors should not be used where structural load bearing performance has to be maintained in anchors subjected to fire conditions.
Resigrout polyester resin grout resin is flammable.
Questions and answers
There are no questions yet. Be the first to ask a question about this product.