K2 WM Proof

Product Description

K2 WM Proof

K2 WM Proof

Uses :

Waterproofing of concrete and block founders, retaining walls, basements and wet areas such as kitchen, toilet floors and balconies. Damp proof membrane in sandwich panel constructions. Curing membrane cum protective coating for sub structure. Facade damp proofing.

Advantages :

Single component, ready to use.
Creep resistant to temperature up to 120⁰C.
Easy to use.
Non-flammable and non-toxic.
Applicable immediately after removal of the form work.
Resistant to chlorides and sulphates commonly present in the soil.
Environment friendly.

Application :

WM proof can be applied by brush, roller or squeegee. hot, dry or very porous substrate should be dampened with clean water prior to application of WM proof. when two or more coats are required, ensure that the preceding coat should be dried up fully. K2 WM Proof also acts as a non degradable curing membrane; hence it may be applied immediately after the removal of mould, to the concrete structure, which has no aesthetic value such as the sub structure of the building.

Shelf life & Storage :

Keep away from direct sunlight and store under normal warehouse conditions. Container must be tightly closed. Shelf life of the product is 12 months from the date of manufacturing provided it is stored in unopened factory packed drums.

Health & Safety :

Use normal safety precautions. Wear rubber hand gloves, safety shoes and safety goggles while using and handling the product. Avoid contact with skin and eyes. In case of accidental contact with eyes, wash with plenty of water and seek medical treatment immediately.